Water and Energy Saving Shower heads

These shower heads are designed to maintain a powerful shower performance while reducing the amount of water used in the shower. They have a built in flow restrictor which will maintain a steady output of 8 litres per minute, compared to 14-20 litres per minute for conventional showers, while maintaining the feel of a forceful and vigorous shower. 70% of water used in a shower is hot, therefore by reducing the water you use you equally reduce the energy required to re-heat it.

Suitable for use with Power Showers, Combi Showers (Boilers) or with Shower Pumps, these showers are guaranteed to reduce water and energy usage by as much as 60%. These showers heads will pay for themselves within 2/3 months on the savings made.

Suitable for all standard shower hoses and fixed head pipes, they fit in minutes with no tools required. Available in bright chrome with dark grey face and light grey rub clean nozzles the FH-242 model has two spray settings and the HH-336 has five. The heads have a large 95mm diameter dial setting so it is easy to turn the heads for a wide spray on full setting.

Note:
Pumped supply only. These shower heads will only work effectively on a pumped water supply such as a Power Shower, Gravity/ Mixer Shower fitted with a pump or Combi Boiler Shower. They are not recommended for use with low pressure Electric Showers. Minimum pressure required 1 bar (14.5psi) maximum 5.5 bar (80psi).